• Highly directive. Designed so that your audience hears everything as intended.

    Speech Clarity uses sound directivity technology so that every word, every note and every message is delivered with precision, no matter where it’s heard.

  • Highly adaptable. Integrated into your surroundings.

    Speech Clarity’s colour range means it fits in with your venue’s aesthetic, perfectly complementing its environment.

  • Highly supported. Tools and guidance as standard.

    Being easy to install and use is just the start. Every d&b system comes with access to expertise and guidance on demand from d&b’s customer support team and online resources.

I knew d&b is a key player in the audio world and investing up-front in a rider-friendly sound system was crucial to making the venue commercially viable.
Tim Last, Trustee at the Church of St John at Hackney, London
While a lot of column loudspeakers lose pattern control at around 2.5kHz, forcing the engineer to EQ out much of the lower frequency information to achieve intelligibility, the cardioid characteristic of the xC-Series extends that horizontal pattern control all the way down to the low frequencies.
Colin McKendry, Absolute Technologies’ Installation Manager
We were totally blown away by how good it sounded. This is the first 2-way passive column speaker that we have seen that actually sounds like a proper PA system. The sound stays coherent and warm, rather than like it’s coming from a flimsy speaker, which is so often the case with the sound setup in a church.
Jacob Julin, Co-Owner SoundCop Consulting

The Speech Clarity bundle consists of

  • 2x 16C Loudspeaker white
  • 2x 24C Loudspeaker white
  • 1x 10D Amplifier
  • 4x Wall mount bracket white

Cabling, accessories and set up are not included in the bundle.

Included products


Column loudspeakers

Installation specific cardioid column loudspeaker

  • Components 4 x 4"/0.75"
  • Dispersion 90° x 40°
  • SPLmax 122 dB
  • Weight 5 kg / 11 lb


Column loudspeakers

Installation specific cardioid column loudspeaker

  • Components 6 x 4"/6 x 1.1"
  • Dispersion 90° x 20°
  • SPLmax 126 dB
  • Weight 9 kg / 19.8 lb



Installation specific four channel amplifier

  • Maximum output power
    4 x 700 W into 4 Ω
  • All current d&b loudspeaker setups except A-Series, J-Series, SL-Series, V-Series, M2, B22-SUB
  • 5 freely assignable GPIOs (General Purpose Input Output) + General fault
share this site